Powered by BAUDOUIN
Alternator STAMFORD
Engine
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 1200kW prp ; 1320kW standby
- Manufacturer: BAUDOUIN
- Model: 12M33G1500.5
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 150 x 185 mm
- Displacement: 39,2 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: API CF, SAE 15W40
- Compression Ratio: 15:1
- Fuel Consumption ESP: 330,5 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 160 L
- Total coolant capacity: 188 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 200 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Hot parts protection
- Moving parts protection
Alternator
- Generator: STAMFORD
- Model: PI734B
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-0 18”
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
Version
SOUNDPROOFED VERSION
- Steel chassis
- Emergency stop button
- Oil sump extraction kit
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Fuel tank drain plug
- Fuel transfer pump (Optional)
- Steel industrial silencer -15db(A) attenuation (Optional)
- Steel residential silencer -35db(A) attenuation. (Optional)
Installation
ELECTRICAL SYSTEM
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
EXHAUST SYSTEM
- Maximum exhaust temperature: 550 ºC
- Exhaust Gas Flow: 277 m3/min
- Maximum allowed back pressure: 75 mbar
NECESSARY AMOUNT OF AIR
- Intake air flow: 5838 m3/h
- Cooling Air Flow: 19 m3/s
- Alternator fan air flow: 2,69 m3/s
STARTING SYSTEM
- Starting power: 10 kW
- Starting power: 13,6 CV
- Recommended battery: 75 x 2 Ah
- Auxiliary Voltage: 24 Vdc
FUEL SYSTEM
- Fuel Oil Specifications: Diesel
Dimensions
- Length: 4.900 mm
- Height: 2.530 mm
- Width: 1.950 mm
- Maximum shipping volume: 24,17 m3
- Weight with liquids in radiator and sump: 8.650 kg
Weight with fluids in radiator and crankcase
Powered by BAUDOUIN
Alternator STAMFORD
Engine
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 1200kW prp ; 1320kW standby
- Manufacturer: BAUDOUIN
- Model: 12M33G1500.5
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 150 x 185 mm
- Displacement: 39,2 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: API CF, SAE 15W40
- Compression Ratio: 15:1
- Fuel Consumption ESP: 330,5 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 160 L
- Total coolant capacity: 188 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 200 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Hot parts protection
- Moving parts protection
Alternator
- Generator: STAMFORD
- Model: PI734B
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-0 18”
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
Version
SOUNDPROOFED VERSION
- Steel chassis
- Emergency stop button
- Oil sump extraction kit
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Fuel tank drain plug
- Fuel transfer pump (Optional)
- Steel industrial silencer -15db(A) attenuation (Optional)
- Steel residential silencer -35db(A) attenuation. (Optional)
Installation
ELECTRICAL SYSTEM
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
EXHAUST SYSTEM
- Maximum exhaust temperature: 550 ºC
- Exhaust Gas Flow: 277 m3/min
- Maximum allowed back pressure: 75 mbar
NECESSARY AMOUNT OF AIR
- Intake air flow: 5838 m3/h
- Cooling Air Flow: 19 m3/s
- Alternator fan air flow: 2,69 m3/s
STARTING SYSTEM
- Starting power: 10 kW
- Starting power: 13,6 CV
- Recommended battery: 75 x 2 Ah
- Auxiliary Voltage: 24 Vdc
FUEL SYSTEM
- Fuel Oil Specifications: Diesel
Dimensions
- Length: 4.900 mm
- Height: 2.530 mm
- Width: 1.950 mm
- Maximum shipping volume: 24,17 m3
- Weight with liquids in radiator and sump: 8.650 kg
Powered by BAUDOUIN
Alternator STAMFORD
Available voltage / Datasheet
Equipment
Engine
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 1200kW prp ; 1320kW standby
- Manufacturer: BAUDOUIN
- Model: 12M33G1500.5
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 150 x 185 mm
- Displacement: 39,2 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: API CF, SAE 15W40
- Compression Ratio: 15:1
- Fuel Consumption ESP: 330,5 l/h
- Lube oil consumption with full load: 0,3 % of fuel consumption
- Total oil capacity including tubes, filters 160 L
- Total coolant capacity: 188 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 200 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Hot parts protection
- Moving parts protection
Alternator
- Generator: STAMFORD
- Model: PI734B
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-0 18”
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
Version
SOUNDPROOFED VERSION
- Steel chassis
- Emergency stop button
- Oil sump extraction kit
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Fuel tank drain plug
- Fuel transfer pump (Optional)
- Steel industrial silencer -15db(A) attenuation (Optional)
- Steel residential silencer -35db(A) attenuation. (Optional)
Installation
ELECTRICAL SYSTEM
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
EXHAUST SYSTEM
- Maximum exhaust temperature: 550 ºC
- Exhaust Gas Flow: 277 m3/min
- Maximum allowed back pressure: 75 mbar
NECESSARY AMOUNT OF AIR
- Intake air flow: 5838 m3/h
- Cooling Air Flow: 19 m3/s
- Alternator fan air flow: 2,69 m3/s
STARTING SYSTEM
- Starting power: 10 kW
- Starting power: 13,6 CV
- Recommended battery: 75 x 2 Ah
- Auxiliary Voltage: 24 Vdc
FUEL SYSTEM
- Fuel Oil Specifications: Diesel
Dimensions
- Length: 4.900 mm
- Height: 2.530 mm
- Width: 1.950 mm
- Maximum shipping volume: 24,17 m3
- Weight with liquids in radiator and sump: 8.650 kg
Dimensions and weight
Weight with fluids in radiator and crankcase